Home and Hobby

How to make mushroom cap: making models of cloth, cardboard or paper

closer the New Year, more urgent question of tailoring different fancy dress.Some kindergartens and schools it may be confined to the autumn holidays, so that young mothers hurriedly looking for ways to put their child properly.For example, in the main suit mushroom - cap, which can be done in several ways.

Soft cap mushroom in the garden: simple sewing

Soft cap mushroom in the garden: a simple tailoring

Soft cap mushroom pattern

large round cap mushroom should hold the desired shape, so the materials it takes a lot: the main cloth will make fleece red, and on the wrong side can betake a lowly fabric - crepe satin, cotton, chintz.But certainly solid, white.

frame for caps perform a large piece of foam or penofol - thin, the foam used to protect fragile items.Each of these tissues as well as the material for the substrate is required not less than 60-70 cm in length, provided that the width will be the same.But the final size you need for your child to become extinct.Finished hat will have broad field, but should look so that it did not seem a previous adult.And to s

ecure the cap on the head will need wide (1.5-2 cm) tape, 1 m in length. At the finish will list (50 by 50 cm) thick white felt.

Pattern for mushroom caps - incomplete circle whose radius is 35 cm. To draw the maximum from the right, you can use the measuring tape fastened in the center of pattern paper a simple needle.First, a full circle is drawn, after which in its original form it is transferred only to the fabric that is intended for the wrong part: cotton or crepe satin.

on fleece and foam rubber should be cut out part circle - with seized sector of 30 degrees.The sector may be bigger and reach up to 90 degrees - this depends on how ready would sloping bonnet: the more withdrawn from the circle, the greater would be the apex of the cone.When you cut pieces do not forget about the need to save about 1-1.5 cm at the seams.

next point - the combination of the main components.Firstly, the need to fold together cotton fleece lining and red top.By virtue of the fact that the outer edge of the latter is shorter in length, it is gathered cotton is negligible.Secondly, foam and fleece overlap and immediately grab a thread that in the future they are not distorted.The increase marked on the fleece, laminated, detail shrinks to a full cone, and cash on the edges sewn.The same thing happens with foam already fixed under the fleece, but lacking of increases.

After this will prisborennoe cotton round sew the workpiece fleece and foam, unscrew the cap and out, setting the stage for all the seams inside.If you know that turn out such a construction would be difficult, you can work directly on the finishing side, but carry a hidden seam, without the use of the sewing machine by hand.

Now you need to remove the extra blank space in the header: to this end, the center of the cotton underside 1-2 stitches pulled to the top of the cone fleece.Then there will be only cut the long ribbon in half, grab the edges of the fire or handle overlock and hem her to get the side straps.And in the final stage of the mushroom cap decorated with white circles, the diameter of which is chosen arbitrarily, depending on the overall size of the hat.It is desirable to cut out of dense felt, so that they are not subjected to deformation.

to soft tissue cap mushroom looked the most believable is to add to it the bottom layer in the form of air undulating fabric: it will be the most translucent "skirt" of the fungus, which looks out from under his cap.It is cut in a classical circumference without removing sectors and sewn by the finished product.Remember that the edges of it should be reviewed, so the diameter of the circle will be 1-2 cm larger than the diameter of the upper surface of the cap.

Cap mushroom: the production of cardboard or paper

Cap mushroom: the production of cardboard or paper

From paper cap mushroom is made almost on the same algorithm as the fabric.However, there is a major caveat - mount caps to the head: in contrast to the tissue paper is smoother and not fixed independently.Therefore, it requires a certain framework: they can speak a little cloth cap or rim, which will also be covered with a cloth, to merge with a maximum cap.

on the pattern paper mushroom caps make allowances for the seams is not necessary: ​​simply from a large sheet of drawing paper cut out a circle with a radius of 40 cm and then also removed from her sector.In the case of paper recommended removal do no more than 35-45 degrees to cap turned shallow and easily gelled its edges: work with a sloping cone will be problematic.

If you manage to find a red cardboard right size, problems with registration will not arise, but if Whatman is simple, need further give it the desired color.It is recommended to do with velvet paper red.With it the most natural effect is achieved, in contrast to the simple design of drawing paper with acrylics or gouache.Top glued small white circles that are also cut from velvet paper or cardboard.

to paper cap mushroom is well rested on the baby's head, you will need to cut the rim and 2 cotton having a size of 40 by 40 cm. From the first cut should be cut circle with a radius of 20 cm, and then glue it to the cap on the reverse side,lies strictly in the middle.Fabric is desirable to pull a little, so she did not go completely on board and retained an air cushion below the apex of the cone.This prevents wearing down too low on the head.The remaining tissue otrez go out to them obtyanut rim.

you can use others. Option of fixing cap on the head, cutting off two long ribbons of 40-50 cm. They will need to hem from the wrong side caps on each side, making the classic ties.In addition, the lock cap mushroom You can, if you make a small inner knitted hat with a wide margin - you can sew out of the ordinary general gum.

And if you is not enough density of the resulting cardboard hats, you can add it by 1 sheet of drawing paper, and cut out a circle with seized sector.Or use for this purpose penofol.

Suit mushroom: Photo

Costume mushroom with beads

Costume mushroom for boy and girl

Suit for the baby mushroom

See also:

  • How to sew a suit Parsley?
  • How to sew a suit Musketeers?
  • How to sew Red Riding Hood costume?

Make a mushroom cap with his hands simply, and each new mother to do the task for the evening.For complete reliability to suit recommended pick lush white trousers and loose blouse of the same color.A ready-made hat can decorate a large butterfly, "sat down" on it, or caterpillar, vyglyanuvshey of fungus.